This wiki is out of date, use the continuation of this wiki instead

From FenixWiki

Revision as of 01:23, 20 November 2007 (edit) Sandman (Talk | contribs) m ← Previous diff		Current revision (23:48, 14 August 2008) (edit) (undo) Sandman (Talk | contribs) m
(4 intermediate revisions not shown.)
Line 7:		Line 7:
	Tells [[Fenix]] which pixels to draw of the coming [[drawing]]s.		Tells [[Fenix]] which pixels to draw of the coming [[drawing]]s.
-	This is done by passing a 32bit value, each bit representing a pixel. Bit 0 represents the first pixels drawn, bit 1 represents the second, etc. When a 33rd pixel is to be drawn or not, bit 0 is checked, etc. This means a value of ''-1'' means normal operation, that is all the pixels will be drawn.	+	This is done by passing a 32bit value, each bit representing a pixel. Bit 0 represents the first pixels drawn, bit 1 represents the second, etc. When a 33rd pixel is to be drawn or not, bit 0 is checked and the cycle starts over. This means a value of <code>0xFFFFFFFF</code> (=<code>2^32-1</code>) means normal operation, meaning all the pixels will be drawn.
		+
		+	Note that this works only for non-filled drawings. For [[draw_curve]](), the pattern is not always visible for the higher smoothness levels.
	== Parameters ==		== Parameters ==
Line 19:		Line 21:
	== Example ==		== Example ==
	<pre>		<pre>
-	Program example;	+	Program example;
	Private		Private
	// int draw_id;		// int draw_id;
Line 36:		Line 38:
	draw_line(11,12,190,12);		draw_line(11,12,190,12);
-	// Draw this funy pattern	+	// Draw this funky pattern
	// binary code 0011 1100 0111 1100 1010 0001 1101 0011		// binary code 0011 1100 0111 1100 1010 0001 1101 0011
	// hex code 3C7CA1D3h		// hex code 3C7CA1D3h
Line 45:		Line 47:
	draw_line(11,22,190,22);		draw_line(11,22,190,22);
		+	// Draw a circle
	draw_circle(100,100,50);		draw_circle(100,100,50);
		+
		+	// Draw a rectangle
	draw_rect(50,50,150,150);		draw_rect(50,50,150,150);
		+	// Draw some lines
	draw_line( 50, 50,100,150);		draw_line( 50, 50,100,150);
	draw_line(100,150,150, 50);		draw_line(100,150,150, 50);
Line 53:		Line 59:
	draw_line(100, 50,150,150);		draw_line(100, 50,150,150);
		+	// Draw two curves: one with high smoothness (bit pattern not visible) and one with low smoothness
	draw_curve( 200,200,		draw_curve( 200,200,
	100,200,		100,200,
	100,150,		100,150,
	300,100,15);		300,100,15);
		+	draw_curve( 200,200,
		+	100,200,
		+	100,150,
		+	300,100,1);
		+
		+	// Draw a filled circle
		+	draw_fcircle(20,180,15);
		+
		+	// Draw a filled rectangle
		+	draw_box(50,180,80,195);
	// Wait for key ESC		// Wait for key ESC
Line 65:		Line 82:
	End		End
	</pre>		</pre>
-	Used in example: [[drawing_map]](), [[draw_line]](), [[key]]()	+	Used in example: [[drawing_map]](), [[draw_line]](), [[draw_circle]](), [[draw_rect]](), [[draw_curve]](), [[draw_fcircle]](), [[draw_box]](), [[key]]()
	This will result in something like:<br>		This will result in something like:<br>

---

Current revision

Contents 1 Definition 2 Parameters 3 Returns 4 Example

[edit] Definition

INT drawing_stipple ( <INT stipples> )

Tells Fenix which pixels to draw of the coming drawings.

This is done by passing a 32bit value, each bit representing a pixel. Bit 0 represents the first pixels drawn, bit 1 represents the second, etc. When a 33rd pixel is to be drawn or not, bit 0 is checked and the cycle starts over. This means a value of 0xFFFFFFFF (=2^32-1) means normal operation, meaning all the pixels will be drawn.

Note that this works only for non-filled drawings. For draw_curve(), the pattern is not always visible for the higher smoothness levels.

[edit] Parameters

INT stipples - Which pixels to draw, repetitive 32bits.

[edit] Returns

INT : true

[edit] Example

Program example;         
Private
//    int draw_id;
Begin

    // Draw in background
    drawing_map(0,background);

    // Set stipplemode to display every other pixel.
    // binary code 0101 0101 0101 0101 0101 0101 0101 0101
    // hex code 55555555h
    drawing_stipple(55555555h);

    // Draw two lines
    draw_line(10,10,190,10);
    draw_line(11,12,190,12);

    // Draw this funky pattern
    // binary code 0011 1100 0111 1100 1010 0001 1101 0011
    // hex code 3C7CA1D3h
    drawing_stipple(3C7CA1D3h);

    // Draw two lines
    draw_line(10,20,190,20);
    draw_line(11,22,190,22);

    // Draw a circle
    draw_circle(100,100,50);

    // Draw a rectangle
    draw_rect(50,50,150,150);

    // Draw some lines
    draw_line( 50, 50,100,150);
    draw_line(100,150,150, 50);
    draw_line( 50,150,100, 50);
    draw_line(100, 50,150,150);

    // Draw two curves: one with high smoothness (bit pattern not visible) and one with low smoothness
    draw_curve( 200,200,
                100,200,
                100,150,
                300,100,15);
    draw_curve( 200,200,
                100,200,
                100,150,
                300,100,1);

    // Draw a filled circle
    draw_fcircle(20,180,15);

    // Draw a filled rectangle
    draw_box(50,180,80,195);

    // Wait for key ESC
    Repeat
        frame;
    Until(key(_ESC))

End

Used in example: drawing_map(), draw_line(), draw_circle(), draw_rect(), draw_curve(), draw_fcircle(), draw_box(), key()

This will result in something like:

The workings of drawing_stipple(): pixel patterns

Drawing Functions

• Delete_draw() • Draw_box() • Draw_circle() • Draw_curve() • Draw_fcircle() • Draw_line() • Draw_rect() • Drawing_alpha() • Drawing_color() • Drawing_map() • Drawing_stipple() • Drawing_z() • Move_draw() •